You cannot scan double-sided documents from the ADF.Īdjust the image quality (fax resolution) or density (scan contrast) as necessary. Note: When sending a double-sided document, set the document on the Platen Glass.
Load a document on the Platen Glass or in the ADF. If your machine is connected through a PBX or other telephone switching systems, you have to dial the outside line access number first, and then the number of the party you are calling. Note: A PBX (Private Branch Exchange) is an on-site telephone switchboard. Redialing the Number Dialed with the Numeric Buttons This section describes dialing and sending faxes directly with the Numeric buttons. The nozzle check pattern will be printed.Sending Faxes You can send a fax using the numeric buttons or using the speed dial buttons on the operation panel. (6) Use the (Up) or (Down) button to select Yes, and press the OK button. The pattern print confirmation screen will appear. (5) Use the (Up) or (Down) button to select Yes, and press the OK button.ĭo not perform any other operations until the machine completes the cleaning of the Print Head. (4) Use the (Up) or (Down) button to select Cleaning, and press the OK button. (3) Use the (Left) or (Right) button to select Maintenance, and press the OK button. (2) Use the (Left) or (Right) button to select Settings, and press the OK button. Open the Paper Output Tray gently, and open the Output Tray Extension. Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in the Cassette. You need to prepare: a sheet of A4 or Letter-sized plain paper Cleaning the Print Head consumes ink, so clean the Print Head only when necessary. Cleaning unclogs the nozzles and restores the print head condition. The machine starts cleaning the Print Head.Ĭlean the Print Head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. (2) Use the (Up) or (Down) button to select Yes and press the OK button. The cleaning confirmation screen will appear. (1) Use the (Up) or (Down) button to select Also B and press the OK button.Ĭlean the Print Head. The screen returns to the Maintenance screen.įor (B) (lines are missing or horizontal white streaks are present) in (1) or (2), or in (1) and (2) : (1) Use the (Up) or (Down) button to select All A and press the OK button. Select the pattern that is closer to the printed nozzle check pattern on the confirmation screen.įor (A) (no missing lines or no horizontal white streaks) in (1) and (2) : (B) Lines are missing/Horizontal white streaks are present (A) No missing lines/No horizontal white streaks Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.Įxamine the nozzle check pattern, and clean the Print Head if necessary.Ĭheck if there are no missing lines in the pattern (1) or no horizontal white streaks in the pattern (2).
If the problem is not resolved after cleaning the Print Head twice: When the Print Results Are Blurred or Uneven:Īfter cleaning the Print Head, print and examine the nozzle check pattern. This can cause trouble with the FINE Cartridges. If printed ruled lines are misaligned or print results are otherwise unsatisfactory, aligning the Print Head may improve print quality.ĭo not rinse or wipe the FINE Cartridges. Follow the procedure below to print the nozzle check pattern, check the print head nozzle condition, then clean the Print Head. If print results are blurred or colors are not printed correctly, the pint head nozzles are probably clogged. When Printing Becomes Faint or Colors Are Incorrect
0 kommentar(er)
